In stock › Categories › Vintage Drum Heads
Vintage Drum Heads
Browse all 92 in the shop — opens pre-filtered.
Head fitment starts with diameter and use: batter sides take the stick, resonant sides voice the shell, and snare-side heads run thin for wire response. Vintage plastic heads from the 50s–70s (Weather Master, Sound King, Big R) are era-correct for restorations and often outlast their modern equivalents.
Match the head to the hoop: vintage flesh hoops and metal hoops seat differently, and a 15-inch parade head is not a 15-inch tom head. Calfskin specialists should start at our dedicated calfskin page.
Match the head to the use: batter sides take the stick, resonant sides voice the shell, and snare-side heads run thin for wire response. Vintage plastic from the 50s to 70s is era-correct for restorations and often outlasts its modern equivalents.
Match the head to the hoop: vintage flesh hoops and metal hoops seat differently, and a parade size is not a tom size at the same diameter. Calfskin specialists should start at the dedicated calfskin page; everyone else should confirm diameter plus application before ordering.
Every Vintage Drum Heads piece below is in stock now — one-of-a-kind, photographed, and honestly graded. When a piece sells it moves to the archive, so this page always shows exactly what is available.
What the catalog holds: Vintage Drum Heads
92 pieces in stock · 944 in the archive.
Common diameters in stock: 15" (11), 16" (9), 22" (7), 18" (6), 10" (4).
Common lug hole spacings: 1 7/8" (5), 3 3/8" (4), 1 3/8" (2), 1 1/2" (2), 1 15/16" (2) — match your shell drilling exactly.
Thread pitches observed: 12-24 (25), 10-24 (11) — 12-24 fits most vintage American lugs, 10-24 older designs.
Every figure above is measured from photographed specimens — live stock plus the archive of past listings — not from a catalog or a price guide.
Frequently asked questions
Batter or resonant — which side?
Batter sides take the stick and run heavier; resonant sides voice the shell and snare sides run thin for wire response. Buy the application first, the diameter second.
Will vintage plastic fit my drum?
Usually when diameter and hoop style agree — vintage flesh hoops and metal hoops seat differently. Confirm the head seats your hoop before tensioning; a parade size is not a tom size at the same diameter.
Are old Weather Masters still playable?
Often yes: well-stored vintage plastic outlasts its modern equivalents. Check for brittle film, pulled flesh hoops, and collar cracks — intact examples tune honestly and carry era correctness.
Calfskin or plastic for my restoration?
Calfskin for period correctness on early drums, vintage plastic for 50s-70s era correctness. Decide which honesty you are buying, then start at the matching page.
Collector guides & data
Deep dives measured from the same catalog snapshots as the figures above:
- Ludwig Supraphonic vs Acrolite: Tell Them Apart & Buy Right
- Vintage Drum Fitment Master: Hole Spacing & Thread Pitch
- Gretsch Round Badge Guide: Dating & Buying 1950s Drums
- Slingerland Radio King Guide: Solid Shells, Cloud Badges & Stick-Savers
- Snare Strainer & Throw-Off Fitment Guide: P83, Zoomatic & Dyna-Sonic
- Vintage Hoops & Rims Guide: Stick-Chopper vs Triple-Flange & Die-Cast
- Bass Drum Spur Fitment Guide: Gull-Wing, Disappearing & Clamp-On
- Tom Mount & Bracket Fitment Guide: Rail, Diamond Plate & Swiv-O-Matic
- Vintage Zildjian Cymbal Stamp Dating Guide: Trans-Stamp to Hollow Logo
- Ludwig Serial Number & Badge Dating Guide: Keystone to Blue/Olive
- Rogers Swiv-O-Matic & Dyna-Sonic Guide: Dayton, Fullerton & Floating Rails
- Vintage Calfskin & Drumhead Fitment Guide: Sizing Skin and Plastic Heads
- Slingerland Lug & Hardware Guide: Imperial, Sound King & Radio King Fitment
- Gretsch Die-Cast & Stick-Chopper Hoop Guide: Profiles, Sizes & Era Cues
- Camco & George Way Drum Guide: Oak Lawn, LA & the DW Lineage
- Vintage Drum Metric vs Imperial Thread Guide: 12-24, 10-24 & Euro Pitches
- Premier & British Vintage Drums Guide: England's 60s Workhorses
- Vintage Japanese Drums Guide: Tama, Pearl & Yamaha MIJ Kits
- Marching, Tenor, Parade & Concert Drums Guide: Corps, Field & Stage
- Vintage Drum Wraps & Plating Restoration Guide: Finishes That Hold Value
- Hoop Metallurgy & Profiles Guide: COB, COS, Die-Cast, Flanged & Wood Hoops
- Badges, Butt Plates, Mufflers & Snare Wires Guide: Small Parts That Date Drums
- Tension Rods, Claws, T-Rods & Clips Guide: Threads That Hold Tuning
- Stands, Tom Holders, Harnesses & Cases Guide: Hold It Up, Carry It Safe
- Vintage Vinyl Pressings, Matrix Runouts & Goldmine Grading Guide
- Vintage Drum Pedals, Thrones, Amplifiers & Musical Goods Collector Guide
- Vintage Drum Hardware & Lugs Guide: Beavertail, Bow-Tie & Unbranded Fitment
- Specialty & Unbranded Percussion Guide: Cowbells, Sticks, Cymbals & One-Offs
- Sonor & German Vintage Drum Hardware Guide: Teardrop Lugs, Metric Threads & Slotted Screws
- Leedy, Conn & Brass/Nickel-Era Hardware Guide: Broadway Parallel & Single-Tension Designs
- Acrylic & Fiberglass Drums Guide: Vistalite, Fibes & Zickos Restoration
- Concert, Symphonic & Orchestra Snare and Timpani Parts Guide
- Vintage Bass Drum Pedal & Hi-Hat Stand Mechanics Guide: Speed King, Ghost & Swiv-O-Matic
- Vintage Drum Claw, T-Rod & Tension Rod Length Encyclopedia
- Vintage Drum Thrones, Cymbal Boom Stands & Flat-Base Hardware Guide
- Complete Vintage Drum Badge Identification & Dating Atlas
- Vintage Snare Butt Plates, Strainer Bridges & Extended Snare Mechanisms Guide
- Vintage Bass Drum Hoops, Inlays, T-Rods & Claw Hook Fitment by Maker Guide
- Vintage Tom Arms, L-Rods, Rail Consolette & Floor Tom Leg Brackets Guide
- Complete Vintage Drum Restoration, Rust Removal & Period-Correct Part Matching Manual
- Full catalog with specs (llms-full.txt)