CounterhoopVintage drums and instruments — by musicians, for musicians. Cart 0

In stock › Categories › Drum Lugs

Vintage Drum Lugs

322 one-of-a-kind pieces in stock. Showing the 48 most recently listed below — the rest are one search away in the shop.

Lug fitment is one number: hole spacing, measured center-to-center between the mounting holes in inches. Common vintage spacings include 6 3/4-inch snare lugs, 7/16-inch-spaced Radio King patterns, and the long Imperial bass-drum casings. Measure your shell before ordering — same-brand lugs from different eras drill differently.

Chrome over brass versus chrome over steel matters for both looks and longevity: brass-based lugs survive pitting far better. Era-correct lugs (keystone badge with keystone-era lugs) protect a drum's collector value; mismatched lugs mark it as a player.

Lug fitment is one number: hole spacing, measured center-to-center between the mounting holes in inches. Common vintage spacings run from compact single-tension patterns to long snare spans — measure your shell drilling before ordering, because same-brand lugs from different eras drill differently.

Chrome over brass survives pitting far better than chrome over steel, and era-correct lugs protect a drum's collector value. Mismatched lugs across one shell mark a player — price it as one and keep the original pattern in hand when sourcing spares.

Every Drum Lugs piece below is in stock now — one-of-a-kind, photographed, and honestly graded. When a piece sells it moves to the archive, so this page always shows exactly what is available.

Hole spacings in stock now

Measured center-to-center. Match your shell drilling exactly.

ValueAvailability
1 5/8"12 in stock
2 1/4"5 in stock
1 9/16"4 in stock
1 15/16"4 in stock
2 7/16"4 in stock
2 3/4"4 in stock
6 3/8"4 in stock
1 11/16"3 in stock

What the catalog holds: Drum Lugs

322 pieces in stock · 1799 in the archive.

Common diameters in stock: 14" (55), 15" (22), 16" (13), 12" (12), 13" (9).

Common lug hole spacings: 1 5/8" (24), 2 3/16" (16), 2 1/4" (15), 1 1/4" (12), 1 9/16" (7) — match your shell drilling exactly.

Thread pitches observed: 12-24 (74), 10-24 (8) — 12-24 fits most vintage American lugs, 10-24 older designs.

Every figure above is measured from photographed specimens — live stock plus the archive of past listings — not from a catalog or a price guide.

Frequently asked questions

How do I match lugs to my shell?

Measure hole spacing center-to-center in inches against the shell drilling — not the old lug — and match era as well as spacing. Same-brand lugs from different eras drill differently.

Brass or steel lugs — does it matter?

For longevity, yes: chrome over brass survives pitting far better than chrome over steel. For value, era-correct lugs with matching stampings protect originality; mismatched metals mark a player.

What are the common vintage spacings?

Single-tension compacts at the small end through long snare spans — the tables below show which spacings actually pass through the catalog. Match your shell drilling exactly; close is not correct.

Can I mix lug brands on one drum?

Mechanically sometimes, but collectors read it as a parts drum. Keep maker-matched sets with consistent stampings for any drum whose value depends on originality.

Collector guides & data

Deep dives measured from the same catalog snapshots as the figures above: